No need to be tech-savvy. You can easily use Umendit to fix the problems listed below:
① iPhone is stuck on the Apple logo or a spinning wheel
② iPhone is stuck in Recovery Mode
③ Black or white screen of death
④ Boot loop/failure
⑤ Frozen/bricked iPhone
⑥ Other iOS/iPadOS/tvOS issues
You can download Umendit and then choose any of the modes. There is no need to pay during the whole process. After that, connect your device to a computer and click “Next”. If you can go to the next interface, then your device is supported by Umendit. If not, you will see a message saying, “Your Device Is Not Supported.” Otherwise, you can go to the tech-specs page and check the list of all the supported devices and system versions.
The free trial version of Umendit aims to help you experience the repairing process. With it, you can find out if your device is supported. Also, you can check to see if the steps are easy enough to follow, the interface is user-friendly, or the iOS versions will meet your needs. In this way, you can make the final decision based on the actual experience. The limit is only set on the last step, and you can think carefully before that. The free trial version also provides the completely free function to enter/exit Recovery Mode without complicated manual operation, which can bring both short-term and long-term convenience for you.
Umendit offers two modes to fix system issues. The Standard Repair is generally used to solve most common problems like an iPhone/iPad stuck on the Apple logo or Recovery Mode screen without data loss. The issues to be fixed will show when you enter the main interface. Advanced Repair focuses on more complicated problems that Standard Repair cannot fix, whereas it will erase your device. Besides, you can use this mode when you forget the password of your device.
For those devices that the software cannot recognize, DFU/Recovery Mode can help them to be detected and thus be repaired normally. For other devices, the DFU/Recovery Mode is set by Apple to repair them more effectively. Both of the modes won’t harm your data.
Although Umendit also takes advantage of firmware, it applies the exclusive technology of the UnicTool team. Thanks for that. Umendit can solve some issues that iTunes can’t fix and bypass the problems like error 4013/4014 that usually occurs during the iTunes repairing process.
The Standard Repair will get your device back to normal without data loss, while the Advanced Repair will erase your device after the repair.
Please free up some space on the disk where you chose to save the firmware file or change the storage path. Normally, there should be 8 to 10GB of storage space left empty to have a firmware file extracted.